Tip:
●
You can modify and save the process template before you start. Start the
process using the modified process template, and do not click
Edit Process
Template
in the Start Process dialog box.
●
If you used the Color Separations dialog box to reduce or map spot colors at
any time before generating final output, the settings in that dialog box will
apply to the final output.
Reducing all spot colors in final output
CAUTION: Reduce spot colors during refine whenever possible. Color conversion
is more predictable during refine than during other processes.
1. Switch to the
Signatures
view, and select the surfaces or signatures
that you want to use for final output.
2. Start a final output process on the selected surfaces or signatures
by dragging the surfaces or signatures to the imposition output
process template.
3. Reduce all spot colors by selecting an option in the process
template:
a. In the Start Process dialog box, click
Edit Process Template
.
b. Expand either the
Render
section or the
ColorConvert
section.
c. In the
Color Libraries
area, select the
Always Use Color
Combiner to Convert Spots
check box.
d. Close the process template.
4. Click
OK
to close the Start Process dialog box.
The final output process occurs. The bitmaps are generated.
Tip:
●
You can modify and save the process template before you start. Start the
process using the modified process template, and do not click
Edit Process
Template
in the Start Process dialog box.
●
If you used the Color Separations dialog box to reduce or map spot colors at
any time before generating final output, the settings in that dialog box will
apply to the final output.
824
Chapter 14—Color
