Calibrate
When this check box is selected, the plate curve and print curve
are applied to the mark. The curves applied are the ones
selected in the
Plate Curve
list and
Print Curve
list in the
Calibration and Screening
section of the process template.
When this check box is cleared, only the plate curve is applied.
To prevent the application of the plate curve to a mark, select
%
%None%%
in the
Plate Curve
list in the
Calibration and
Screening
section of the process template.
Locate Sheet Marks Adjacent to
(See
on page
and
on page
)
Select
Left
,
Right
,
Bottom
, or
Top
to determine on which edge
of the paper or plate a sheet mark is placed.
The default setting is
Bottom
.
at Distance
(See
on page
.)
Determines where, relative to the edge, the mark is placed:
●
Sheet marks are placed relative to the plate edge. Depending
on the distance you type, you can place the sheet mark on
the press sheet or on the plate.
●
Page marks are placed relative to the finished page size (the
imposition hole).
Justified
Select
Left
,
Center
, or
Right
to determine the justification for
the sheet mark.
The default value is
Center
.
Imposition Output process template
539
