Bayard Printing - Design for Digital

Imposition, folding and finishing With the Kodak NexPress press, you can set up your documents as 2-page reader spreads, or 1- or 2-page printer spreads. Automatic imposi- tion software handles the setup and proper sequencing, but it’s still a good idea to give your printer a mock-up of your layout to avoid any possible mis- understandings. Remember to allow for the proper amount of space in the gutter for the binding process you will be using. When it comes to folding, one concern with electrophotographic imaging systems is cracking in heavy coverage areas. You can reduce the possibility of cracking by designing your job with less coverage on areas to be folded. Whenever possible, design your job to fold with the grain of the paper, not against the grain. For best results, score all folds. If you laminate the final pages—especially covers—you can eliminate cracking and provide a durable, finished look. All output from a Kodak NexPress press can be varnished, laminated, and finished with an aqueous coating or a non-oil based UV coating. In addition, some of the presses have a Kodak NexPress fifth imaging solution for clear overcoating with Kodak NexPress clear dry ink. Ask your printer. Trimming and binding Virtually all commonly used binding methods are available for use with digitally printed documents. If you’re taking advantage of the fast turn- around possible with digital printing though, you’ll probably want to keep your binding options simple to save time. The most efficient way to finish your digital project is with a near-line finishing system. Of course, all exist- ing off-line finishing equipment can also be used. Be sure to check with your printer for specific finishing options. A fold that runs in the same direction as the grain will be neater and smoother with minimal or no cracking. Every paper has a grain, which is created when it’s manufactured. Folding against the grain can cause cracking. Keys to a clean finish Designing for Success 11